KYOCERA Announces Ultra-Wide Printhead Offering Simultaneous Four-Color Output for Industrial Inkjet Printing, from Textiles to Billboards
Single unit with 112mm print-width produces four colors simultaneously at 150dpi
14 October 2015
Kyoto / Neuss − Kyocera Corporation (President: Goro Yamaguchi) today announced that it has developed a new 150 dot-per-inch (dpi) inkjet printhead — a key component for inkjet printers — which enables simultaneous four-color “CMYK” printing from a single printhead.
|Model||Inkjet printhead KJ4B-0150|
|Print speed||76.2m/min. (simultaneous four-color printing at 600dpi)|
|Effective print width||112mm|
|Development facility||Kagoshima Kokubu Plant, Japan|
1. Simultaneous four-color printing from a single printhead
This product significantly reduces the number of printheads required in industrial printing equipment (by 75 percent) by enabling simultaneous four-color printing from a single printhead. Through this key advantage, and by reducing the need for supplemental componentry, it facilitates lighter and smaller equipment.
2. One of the world’s widest printheads: simplifies equipment design and maintenance
Featuring one of the world’s widest* effective print widths (112mm), the KJ4B-0150 further reduces the number of printheads required, minimizing design complexity even for ultra-wide-format equipment. Additionally, Kyocera’s proprietary printhead technology simplifies both equipment assembly and maintenance, including micron-level alignment, ink-discharge and wiring.
3. High-quality, high-speed printing
Kyocera’s KJ4B-0150 printhead delivers high-quality, high-speed printing through ultra-high-precision ink discharge made possible by Kyocera’s proprietary technologies in fluid-channel structure design and piezo-actuator drive control. The result is significantly greater productivity, with four-color digital print speeds up to 76.2 meters per minute at 150dpi resolution.
The industrial printing market is experiencing unprecedented demand for digital technologies to support smaller print runs, shorter turnaround times, inventory reduction and variable-data printing**. Especially in the fashion apparel industry, these demands are rapidly increasing with the growing trend of fast fashion.
The conventional technology for industrial printing requires costly printing plates to be created for each color printed. This results in high fixed-setup costs that make short print runs economically unfeasible. It also leads to high inventory management expenses, as printed materials and plates require storage. In contrast, digital inkjet printing eliminates the printing plate and allows for the immediate printing of only the required amount of design data, contributing not only to increased productivity and cost reduction, but also a reduction in environmental burden, as plate-washing waste is not generated in the production process.
Kyocera already mass-produces a 300dpi two-color inkjet printhead, as well as 600dpi and 1200dpi monochrome variants, that offer world-class levels of high-resolution print speeds. By launching a new 150dpi printhead with simultaneous four-color capability, Kyocera addresses a multitude of market demands for high-speed, high-resolution printing; equipment downsizing; cost reduction; and reduced environmental impact, thus expanding the possibilities of the digital printing industry.
* Based on research by Kyocera (as of October 6, 2015)
** Variable-data printing (VDP): A printing method by which individually unique data (e.g. personalized information) is printed on separate sheets without stopping or slowing the printing process.
For more information about Kyocera: www.kyocera.eu
Contact for journalists
Manager Corporate Communications
Contact for product information
- KYOCERA Introduces Irish Claddagh Ring Designed by Paul Costelloe, Using Hypoallergenic COBARION
- KYOCERA Receives Japan Environment Minister’s Award for Record 8th Consecutive Year
- KYOCERA Develops Some of World’s Smallest Multilayer Ceramic Capacitors for Mobile Devices
- KYOCERA WINS GOOD DESIGN AWARD FOR NEW MFPs
- KYOCERA RECIEVES “HIGHLY RECOMMENDED” RATING FROM BLI FOR THIRTEEN PRODUCTS
- KYOCERA to Expand Medical Product Development
- KYOCERA Breaks Ground on New Manufacturing Plant for Ceramic Structural Components in Kagoshima, Japan
- For the thirty-third time in its history, the Inamori Foundation has conferred the Kyoto Prize to researchers who have contributed to the fields of “Advanced Technology”, “Basic Science” and “Arts and Philosophy”
- A dream kitchen present under the Christmas tree
- KYOCERA Begins Research in AI-based Image Recognition to Help Diagnose Skin Diseases and Cancers via Smartphone
- KYOCERA DOCUMENT SOLUTIONS CELEBRATES 25 YEARS OF ECOSYS
- KYOCERA enhances its AI-based Online Image Classifying Service “Labellio” with Higher Capacity for Big Data
- KYOCERA’s Kyoto Opal Sparkles in New Glitters by Nail Labo
- KYOCERA DOCUMENT SOLUTIONS WINS TECHNICAL PACKAGING AWARD IN JAPAN
- KYOCERA Technology Used to Create one of the World’s Smallest Crystal Units Awarded Prestigious Research Prize in Japan